作者指南

Authors are encouraged to submit manuscripts of LETTERS.

Letters are four page articles designed to provide rapid dissemination of original, cutting-edge ideas and timely, significant contributions in signal, image, speech, language and audio processing.

Submissions/resubmissions must be previously unpublished and may not be under consideration elsewhere.

 

鼓励作者提交书稿。
信件是一种长达四页的文章，旨在迅速传播原创的、前沿的思想，并在信号、图像、语音、语言和音频处理方面做出及时而重要的贡献。
提交/重新提交的文件必须事先未公布，不得在其他地方进行审议。

鼓励作者提交书稿。

Every manuscript must:

1. provide a clear statement of the problem and what the contribution of the work is to the relevant research community;
2. state why this contribution is significant (what impact it will have);
3. provide citation of the published literature most closely related to the manuscript; and
4. state what is distinctive and new about the current manuscript relative to these previously published works

每份手稿必须：
提供问题的明确陈述，以及工作对相关研究团体的贡献；
说明为什么这一贡献是重大的（它将产生什么影响）；
提供与手稿最密切相关的已发表文献的引用；以及
说明当前手稿相对于这些先前出版的作品有何独特之处和新特点。

By submission of your manuscript to this Letters, all listed authors have agreed to the authorship list and all the contents and confirm that the work is original and that figures, tables and other reported results accurately reflect the experimental work. In addition, the authors all acknowledge that they accept the rules established for publication of manuscripts, including agreement to pay color charges, and any other charges and fees associated with publication of the manuscript. Such charges are not negotiable and cannot be suspended. The corresponding author is responsible for obtaining consent from all co-authors and, if needed, from sponsors before submission.

In order to be considered for review, a paper must be within the scope of the journal and represent a novel contribution. A paper is a candidate for an Immediate Rejection if it is of limited novelty, e.g. a straightforward combination of theories and algorithms that are well established and are repeated on a known scenario. Experimental contributions will be rejected without review if there is insufficient experimental data. The Letters are published in English. Papers that have a large number of typographical and/or grammatical errors will also be rejected without review.

In addition to presenting a novel contribution, acceptable manuscripts must describe and cite related work in the field to put the contribution in context. Do not give theoretical derivations or algorithm descriptions that are easily found in the literature; merely cite the reference.

New and revised manuscripts should be prepared following the "Manuscript Submission" guidelines below, and submitted to the online manuscript system, ScholarOne Manuscripts. Do not send original submissions or revisions directly to the Editor-in-Chief or Associate Editors; they will access your manuscript electronically via the ScholarOne Manuscripts system.

通过向本信函提交您的手稿，所有列出的作者同意作者名单和所有内容，并确认作品是原创的，图表和其他报告结果准确反映了实验工作。
此外，作者都承认，他们接受为出版手稿而制定的规则，包括同意支付颜色费用，以及与出版手稿有关的任何其他费用。
这种收费是不可谈判的，不能中止。通讯作者负责在提交前征得所有合著者的同意，如有必要，还应征得提案人的同意。
为了被认为是审查，论文必须在期刊的范围内，并代表一个新的贡献。
如果一篇论文的新颖性有限，例如理论和算法的简单组合，这些理论和算法已经建立，并且在已知的场景中重复，那么它就是立即被拒绝的候选者。
如果没有足够的实验数据，实验贡献将被拒绝而不进行审查。这些信件是用英文出版的。
有大量印刷和/或语法错误的论文也将被拒绝，不经审查。
除了提出一个新的贡献，可接受的手稿必须描述和引用相关的工作领域把贡献的背景。
不要给出文献中容易找到的理论推导或算法描述；只引用参考文献。
新的和修订的稿件应按照下面的“稿件提交”指南进行编写，并提交到在线稿件系统，即ScholarOne稿件。
不要直接向总编辑或副编辑发送原稿或修订稿；他们将通过ScholarOne手稿系统以电子方式访问您的手稿。

1

Manuscript Submission. Please follow the next steps.

1. Account in ScholarOne Manuscripts.
   If necessary, create an account in the on-line submission system ScholarOne Manuscripts. Please check first if you already have an existing account which is based on your e-mail address and may have been created for you when you reviewed or authored a previous paper.
   • All IEEE journals require an Open Researcher and Contributor ID (ORCID) for all authors. ORCID is a persistent unique identifier for researchers and functions similarly to an article’s Digital Object Identifier (DOI). The author will need a registered ORCID in order to submit a manuscript or review a proof in this journal.
2. Electronic Manuscript.
   Prepare a PDF file containing your manuscript in double-column, single-spaced format using a font size of 10 points or larger, having a margin of at least 1 inch on all sides. Upload this version of the manuscript as a PDF file "double.pdf" to the ScholarOneManuscripts site. Templates can be found at the IEEE Author Center.
3. EDICS.
   All submissions must be classified by the author with an EDICS (Editors’ Information Classification Scheme) selected from the list of EDICS published online at the SPL EDICS page. Upon submission of a new manuscript, please choose the EDICS categories that best suit your manuscript. Failure to do so will likely result in a delay of the peer review process.
4. Additional Documents for Review.
   Please upload pdf versions of all items in the reference list that are not publicly available, such as unpublished (submitted) papers. Graphical abstracts and supplemental materials intended to appear with the final paper (see below) must also be uploaded for review at the time of the initial submission for consideration in the review process. Use short filenames without spaces or special characters. When the upload of each file is completed, you will be asked to provide a description of that file.
5. Supplemental Materials.
   IEEE Xplore can publish multimedia files (audio, images, video, pseudocode and detailed algebraic manipulations of proofs), datasets, and software (e.g. Matlab code) along with your paper. Alternatively, you can provide the links to such files in a README file that appears on Xplore along with your paper. For details, please see IEEE Author Center." To make your work reproducible by others, the TRANSACTIONS encourages you to submit all files that can recreate the figures in your paper. The supplemental material may also include additional text related to appendices containing proofs of results, descriptions of additional simulations, etc. When supplemental material is present, the equations, theorems, tables, and figures, etc., should all be numbered consecutively to those in the article, so that a reference to, say, "Fig. 10" is unambiguous. The main body of the article should contain the core ideas and should suffice for most readers, whereas the material in the supplement material should be targeted at specialists who need more detail than what the article page limits allow. Supplemental text material for SPL is limited to one page.
6. Submission.
   After uploading all files and proofreading them, submit your manuscript by clicking "Submit." A confirmation of the successful submission will open on screen containing the manuscript tracking number and will be followed with an e-mail confirmation to the corresponding and all contributing authors. Once you click "Submit," your manuscript cannot be changed in any way.
7. Copyright Form and Consent Form.
   By policy, IEEE owns the copyright to the technical contributions it publishes on behalf of the interests of the IEEE, its authors, and their employers; and to facilitate the appropriate reuse of this material by others. To comply with the IEEE copyright policies, authors are required to sign and submit a completed "IEEE Copyright and Consent Form" prior to publication by the IEEE. The IEEE requires authors to use the electronic copyright form (eCF) tool within the ScholarOne Manuscripts system. You will be redirected to the "IEEE Electronic Copyright Form" wizard at the end of your original submission; please simply sign the eCF by typing your name at the proper location and click on the "Submit" button.

在学术手稿中的叙述。

如有必要，在网上投稿系统创建一个帐户。请先检查您是否已有一个基于您的电子邮件地址的现有帐户，该帐户可能是在您审阅或撰写以前的论文时为您创建的。
所有IEEE期刊都要求所有作者都有一个开放的研究者和贡献者ID（ORCID）。
ORCID是研究人员的持久唯一标识符，其功能类似于文章的数字对象标识符（DOI）。作者将需要一个注册的ORCID，以提交一份手稿或审查在这本杂志的证据。
电子手稿。

准备一个PDF文件，包含你的手稿在双栏，单间距的格式使用10点或更大的字体大小，有一个至少1英寸的边距在所有方面。将此版本的手稿上载为PDF文件”双精度.pdf“到ScholarOneManuscripts网站。模板可以在IEEE作者中心找到。

圣旨。

所有提交的材料必须由作者使用从SPL EDICS页面在线发布的EDICS列表中选择的EDICS（编辑信息分类方案）进行分类。
在提交新的手稿时，请选择最适合您的手稿的目录。如果不这样做，可能会导致同行评审过程的延迟。

 

Manuscript Length.

1. Must not exceed four pages of technical information including title; names of authors and their complete contact information; abstract; text; all images, figures and tables, appendices and proofs; overlapping text and/or figures is prohibited. A fifth page is available for references only.
2. There will be no exceptions per the EIC in regard to the 5 page maximum page limitation and paying overlength page charges is not an option for a Letters submission per the EIC.
3. The DOUBLE-COLUMN version must be a single-spaced (2-column) PDF of 5 pages or less, using a font size of 10 points or larger, having a margin of at least 1 inch on all side.
4. All SP-L submissions are also required to submit a single-column, double-spaced version of the manuscript.

手稿的长度。
包括标题在内的技术信息不得超过四页;作者姓名和他们的完整联系信息;抽象的;文本;所有图像、图表、附录和校样;禁止文字和/或数字重叠。第五页仅供参考。

关于5页的最大页数限制，每个EIC都没有例外，并且支付超长页数的费用不是每个EIC提交信件的一个选项。

双列格式必须是单行距(2列)的PDF文件，页数不超过5页，字体大小为10点或更大，每边距至少为1英寸。

所有SP-L提交的稿件也需要提交一份单栏，双倍行距的稿件。

Resubmission of Previously Rejected Manuscripts. Authors of manuscripts rejected from any journal are allowed to resubmit their manuscripts only once. At the time of submission, you will be asked whether your manuscript is a new submission or a resubmission of an earlier rejected manuscript. If it is a resubmission of a manuscript previously rejected by any journal, you are expected to submit supporting documents identifying the previous submission and detailing how your new version addresses all of the reviewers’ comments. Papers that do not disclose connection to a previously rejected paper or that do not provide documentation as to changes made may be immediately rejected.

Author Misconduct. Author misconduct includes plagiarism, self-plagiarism, and research misconduct, including falsification or misrepresentation of results. All forms of misconduct are unacceptable and may result in sanctions and/or other corrective actions. Plagiarism includes copying someone else’s work without appropriate credit, using someone else’s work without clear delineation of citation, and the uncited reuse of an author’s previously published work that also involves other authors. Self-plagiarism involves the verbatim copying or reuse of an authors own prior work without appropriate citation, including duplicate submission of a manuscript elsewhere (journal or conference), and submission of two different manuscripts which overlap substantially in language or technical contribution. The aforementioned forms of author misconduct also cover materials from third party servers (such as Arxiv). Also, papers including inappropriate or abusive language are subject to Immediately Rejection.

For more information on the definitions, investigation process, and corrective actions related to author misconduct, see the Signal Processing Society Policies and Procedures Manual, Section 6.1. Author misconduct may also be actionable by the IEEE under the rules of Member Conduct.

Journal to conference papers. SPS now provides journal papers presentation opportunities for recent and in-press IEEE journal articles within the on the conference. Journals being considered are: Signal Processing Magazine, IEEE Transactions on Image Processing, IEEE Journal on Selected Topics in Signal Processing, IEEE Signal Processing Letters, IEEE Transactions on Information Forensics and Security, IEEE Transactions on Signal Processing, IEEE Transactions on Computational Imaging and IEEE Wireless Communication Letters. Please check the conference website for specific details.

Submission Format. Authors are required to prepare manuscripts employing the on-line style files developed by IEEE, which include guidelines for abbreviations, mathematics, and graphics. All manuscripts accepted for publication will require the authors to make final submission employing these style files. The style files are available on the web at the IEEE Author Center under "Template for all Transactions." (LaTeX and MS Word). Please note the following requirements about the abstract:

• The abstract must be a concise yet comprehensive reflection of what is in your article.
• The abstract must be self-contained, without abbreviations, footnotes, displayed equations, or references.
• The abstract must be between 150-250 words.
• The abstract should include a few keywords or phrases, as this will help readers to find it. Avoid over-repetition of such phrases as this can result in a page being rejected by search engines.
•  
• 在学术手稿中的叙述。

• 如有必要，在网上投稿系统创建一个帐户。请先检查您是否已有一个基于您的电子邮件地址的现有帐户，该帐户可能是在您审阅或撰写以前的论文时为您创建的。
  所有IEEE期刊都要求所有作者都有一个开放的研究者和贡献者ID（ORCID）。ORCID是研究人员的持久唯一标识符，其功能类似于文章的数字对象标识符（DOI）。作者将需要一个注册的ORCID，以提交一份手稿或审查在这本杂志的证据。
  电子手稿。

  准备一个PDF文件，包含你的手稿在双栏，单间距的格式使用10点或更大的字体大小，有一个至少1英寸的边距在所有方面。将此版本的手稿上载为PDF文件”双精度.pdf“到ScholarOneManuscripts网站。模板可以在IEEE作者中心找到。圣旨。

  所有提交的材料必须由作者使用从SPL EDICS页面在线发布的EDICS列表中选择的EDICS（编辑信息分类方案）进行分类。在提交新的手稿时，请选择最适合您的手稿的目录。如果不这样做，可能会导致同行评审过程的延迟。

In addition to written abstracts, papers may include a graphical abstract; see IEEE Author Center for options and format requirements.

IEEE supports the publication of author names in the native language alongside the English versions of the names in the author list of an article. For more information, see "Publishing Author Names in Native Languages" on the IEEE Author Tools page.

Refining the Use of English Language in Your Manuscript:
English language editing services can help refine the language of your article and reduce the risk of rejection without review. IEEE authors are eligible for discounts at several language editing services; visit the IEEE Author Center to learn more. Please note these services are fee-based and do not guarantee acceptance. You are also free to ask a colleague who is fluent in English to assist with editing. However, if the revised manuscript does not meet the English usage criteria, then you are required to use a language editing service for a fee, or you must withdraw the manuscript.

Single-blind review process. The articles in this journal are peer reviewed in accordance with the requirements set forth in the IEEE Publication Services and Products Board Operations Manual (IEEE PSPB) (sections 8.2.1.C & 8.2.2.A). Each published article was reviewed by a minimum of two independent reviewers using a single-blind peer review process, where the identities of the reviewers are not known to the authors, but the reviewers know the identities of the authors. Articles will be screened for plagiarism before acceptance.

Accepted papers. As of 01-Feb-2018, the Signal Processing Society does not permit changes to a manuscript after it has been accepted for publication. During each stage of the submission/revision process, authors are required to upload a "Formatted (Double Column) Main File - PDF Document Only" version of their manuscript. If your manuscript is accepted in this round of review, the "Formatted (Double Column) Main File - PDF Document Only" file will be posted to IEEE Xplore as an early access article. For this reason, we ask that the "Formatted (Double Column) Main File - PDF Document Only" be publication ready.

During the revision process, please be sure to remove any colored text or annotations and add any acknowledgments that you would like included in your "Formatted (Double Column) Main File - PDF Document Only." Additionally, if you would like to include an annotated manuscript for reviewers, please upload it as a supporting document.

Open Access. The publication is a hybrid journal, allowing either Traditional manuscript submission or Open Access (author-pays OA) manuscript submission. Upon submission of your final files, if you choose to have your manuscript be an Open Access article, you commit to pay the discounted OA fee if your manuscript is accepted for publication in order to enable unrestricted public access. The OA fee is $2,045. Any other application charges (such as charge for the use of color in the print format) will be billed separately once the manuscript formatting is complete but prior to the publication. If you would like your manuscript to be a Traditional submission, your article will be available to qualified subscribers and purchasers via IEEE Xplore. No OA payment is required for Traditional submission. Corresponding authors from low-income countries are eligible for waived or reduced open access APCs.

除了书面摘要外，论文还可能包括图形摘要；有关选项和格式要求，请参见IEEE作者中心。
IEEE支持在文章的作者列表中以母语和英文版的名称一起发布作者姓名。有关详细信息，请参阅IEEE作者工具页上的“以本机语言发布作者姓名”。
改进手稿中英语的使用：

英语编辑服务可以帮助你完善文章的语言，减少不经审查就被拒绝的风险。IEEE作者有资格在一些语言编辑服务处享受折扣；访问IEEE作者中心了解更多信息。请注意，这些服务是收费的，不保证接受。你也可以请一位英语流利的同事协助编辑。但是，如果修改后的稿件不符合英语使用标准，则需要付费使用语言编辑服务，否则必须收回稿件。
单盲审查过程。根据IEEE出版物服务和产品委员会操作手册（IEEE PSPB）（第8.2.1.C和8.2.2.A节）中规定的要求，对本期刊中的文章进行同行评审。每一篇发表的文章都由至少两位独立的审稿人采用单盲同行评议的方式进行评议，作者不知道审稿人的身份，但审稿人知道作者的身份。文章在被接受前将被审查是否有抄袭。
接受的论文。自2018年2月1日起，信号处理学会不允许在手稿被接受出版后对其进行更改。
在提交/修订过程的每个阶段，作者都需要上传其手稿的“格式化（双列）主文件-仅PDF文档”版本。
如果您的手稿在这一轮审查中被接受，“格式化（双栏）主文件-仅PDF文档”文件将作为早期访问文章发布到IEEE Xplore。
因此，我们要求“格式化（双栏）主文件-仅PDF文档”已准备好发布。
在修订过程中，请务必删除任何彩色文本或批注，并添加您希望包含在“格式化（双栏）主文件-仅限PDF文档”中的任何确认。
此外，如果您希望包含供审阅者使用的带批注的手稿，请将其作为支持文档上载。
开放访问。该出版物是一种混合期刊，允许传统的稿件提交或开放存取（作者付费OA）稿件提交。
提交最终文件后，如果您选择让您的手稿成为开放获取文章，您承诺如果您的手稿被接受出版，您将支付折扣OA费用，以实现不受限制的公众访问。OA费用为2045美元。
任何其他申请费用（如印刷格式中使用颜色的费用）将在手稿格式完成但在出版之前单独计费。
如果您希望您的手稿是一个传统的提交，您的文章将提供给合格的订阅者和买家通过ieeexplore。
传统提交无需OA付款。来自低收入国家的通讯作者有资格豁免或减少开放获取APC。

 

Page Charges

Color Graphics. All SPS publications are online-only, so color graphics are always free of charge.

页面费用
彩色图形。所有的SPS出版物都是在线的，所以彩色图片总是免费的。