安裝wukong

1.conda create -n robot python=3.7

conda activate robot

2.git clone https://github.com/wzpan/wukong-robot.git

cd wukong-robot

3.sudo apt-get install python-pyaudio python3-pyaudio sox pulseaudio libsox-fmt-all ffmpeg

pip3 install pyaudio --> 改為 python -m pip install pyaudio

4.cd wukong-robot

pip3 install -r requirments.txt

安裝wukong-contrib

1.mkdir $HOME/.wukong

cd $HOME/.wukong

2. git clone http://github.com/wzpan/wukong-contrib contrib

pip3 install -r contrib/requirements.txt

安裝swig (編譯所需) 3.0.10

1.wget http://hahack-1253537070.file.myqcloud.com/misc/swig-3.0.10.tar.gz

tar xvf swig-3.0.10.tar.gz

cd swig-3.0.10

./configure --prefix=/usr --without-clisp --without-maximum-compile-warnings

make

sudo make install

install -v -m755 -d /usr/share/doc/swig-3.0.10

sudo cp -v -R Doc/* /usr/share/doc/swig-3.0.10

安裝snowboy

1.wget http://hahack-1253537070.file.myqcloud.com/misc/snowboy.tar.bz2

tar -xvjf snowboy.tar.bz2

cd snowboy/swig/Python3

sudo make

2.產生 _snowboydetect.so

拷貝到 ~/wukong-robot/snowboy/examples/Python3, 執行demo.py 進行測試

(1) 需修改snowboydecoder.py

把” from . import snowboydetect” 改成 ” import snowboydetect”

(2) 要有三個檔案 snowboydecoder.py snowboydetect.py _snowboydetect.so

一個目錄 resources

一個範例語音(或自己訓練的) snowboy.umdl

3. python3 demo.py snowboy.umdl

4. 自己訓練則到 https://snowboy.kitt.ai/dashboard 下載 xxx.pmdl 檔案

執行python3 wukong.py

1.pip3 install -r requirements.txt

python3 wukong.py update

python3 wukong.py

2.開啟瀏覽器 http://localhost:5000/